The scientific foundation of no touch torture by Martin Bott
Electromagnetic fields such as radio frequency and laser radiations always cause an electric current if they are acting on conducting materials such as metals and the human body. To have an effect on the nerves or the muscles this current needs to imitate the currents used by the body, as is the case with the commercially available muscle trainers or other bioelectric apparatus.
The currents used by the nerves have a low frequency in the order between several hertz to several kilohertz. To produce such low frequency currents through high frequency microwave or laser radiation several methods are used.
One technique is to use beats between two high frequency electromagnetic radiations with slightly different frequencies. These beats are actually a low frequency electromagnetic field which then causes a low frequency current. The frequency of the beats is actually the frequency difference between the two high frequency fields.
If an electromagnetic field of 1 Ghz and another of 1 Ghz plus 100 hertz are interacting, the resulting beats have a frequency of 100 hertz. These electromagnetic beats cause a current with a frequency of 100 hertz which then contracts muscles.
If the frequency of the beats is in the audible range, one would hear a sound or voice depending on the signal being used for modulation. Technically spoken one would overlay two high frequency electromagnetic radiations of equal frequency. To one of these microwave or laser radiations the desired low frequency signal, for example recorded nerve pulses or voice is added in a way that leads to an addition of the high frequency and the low frequency signal. The resulting beats between the two high frequency signals consist of a low frequency electromagnetic field which has the characteristics of the added nerve pulses or voice. This electromagnetic Field then causes an electrical current similar to the nerve pulses or voice added to the high frequency signal. And such an artificial nerve current has the same effect as the nerve currents used by the body.
Another possibility is to use an asymmetric electromagnetic field where the positive component has a different frequency from the negative component. Electric currents in the body are not caused by moving electrons as in metals but are mainly ionic currents. That is, they consist of moving electrically charged Atoms. These Atoms have a certain mass and size. Their relative size causes them to have, additional to their electrical resistance, a mechanical resistance in the body fluid. If the ion is moved faster, its mechanical resistance rises even faster.
The mechanical resistance rises as the square of the speed. This means that if the speed is doubled, the resistance is 2×2 which gives a value of 4. And if the speed rises by a factor of 3 the mechanical resistance rises by 3×3 which is 9. This effect can be felt if one moves the hand slow and fast through water.
As a consequence the ions conducting the current in the body experience a higher mechanical resistance if moved at higher frequencies as compared to lower frequencies. If the high frequency signal is asymmetric, meaning that the positive component of the sine wave has a different frequency as the negative component, the ion experiences two different mechanical resistances as well.
Since the energies of both components of the signal are equal, the ions are moved back and forth by the asymmetric field. But because of the lower mechanical resistance during slow movement they move a bit further in the direction enforced by of the lower frequency component.
This is illustrated with a DVD being moved through water in the Film 4 Strahlenwaffen. Such an asymmetric electromagnetic field can be generated with frequencies up to many Ghz by fast synthesizers. These asymmetric high frequency fields are causing ionic electric currents which can simulate nerve pulses in the body.
This techniques are used for brainwashing as well. If the parts of the brain which are passing the nerve signal from the ear to the brain are irradiated with such a speech modulated signal, the resulting voice is not being heard, as it is not coming from the ear. But it is not being thought either as it is not coming from inside the brain. That can make it difficult to decide whether specific thoughts or opinions are the result of brainwashing. Especially if one is not aware of this possibility. Brainwashing can be suspected if opinions or thoughts are openly false or even lead to dangerous behavior like taking drugs, drinking and smoking.
Suitably speech modulated electromagnetic fields are perceived as being heard or thought by certain brain regions involved in hearing. In a similar way the regions of the brain responsible for seeing can be stimulated by electromagnetic fields. The question arises to what extend this can be used. It is known that every point on the surface of the body corresponds to another point on the surface of the brain with regard to feeling, hearing and seeing. The surface of the brain is, so to speak, an image of the surface of the body with regard to data processing. Points being close together on the surface of the body or the retina are as well close together in the respective region of the brain. The region responsible for seeing is situated in the backof the skull, right over the neck and named visual cortex.
This opens the possibility to stimulate this region of the brain with laser using the techniques described in detail elsewhere in this text. A high resolution low frequency or asymmetric electromagnetic field being produced by heterodyning of two laser beams is used to scan the surface of the visual cortex. On its way over the brain surface it stimulates the nerves to cause the impression of seeing. And thus “write” a picture or a film onto the visual cortex.
There are two major obstacles to simply “write” a picture onto the brain. The first is that the structure and organization of every brain is a little different. The second is that the surface of the visual cortex is quite large and as a consequence is bent to fit into the scull resulting in a three dimensional structure.
The laser has to write the picture without the computer exactly knowing which part of the brain surface is matching a given point on the retina. This problem certainly would result in a distorted picture being “seen”. With modern computer techniques, matching a picture or a film to the bent surface of the brain, it is possible to write an exact picture onto the brain. The difficulty is to know which point on the brain corresponds to which point on the retina. This demands a possibility to calibrate the laser weapons.
But how can the brain, the retina and nerves in general be tapped with a sufficient high resolution at some distance? If a microwave signal is interacting with a low frequency signal such as is occurring in a nerve, both are heterodyning. This heterodyning causes signals with the frequencies microwave+nerve signal and another one microwave-nerve signal. As these resulting signals are microwave signals as well, they are radiating from the nerve and can be received at some distance, allowing direct measurement of the electric activity of the nerves.
The voltage of a nerve pulse measures about 50 to 100 millivolts. There are electronic circuits for transmitters operating with 600 millivolt and even less. These of course only have a short range of maybe 10 or 20 meters. However, the alternating voltage in the antenna of such a transmitter may not be much higher than 100 millivolt. Similar oscillating voltages result in similar radiated power. The nerves may not radiate as good as a metallic antenna but with the use of low noise amplifiers this may be compensated to some extend. A range of 5 to 10 meters for such a nerve tapping system seems to be reasonable and is more than what is necessary to map the electric activity of the retina and the brain.
The system needs two high resolution laser beams with slightly different frequencies to produce one beam of beats in the microwave range. These high resolution beats scan the group of nerves to be mapped. The local heterodyning between the electromagnetic beats in the microwave range and the nerve pulses cause microwave signals of different frequencies which are radiated. This allows to measure the nerve activity at some distance with a resolution depending on the resolution of the laser.
The technique is employed in the following way: One system is scanning the retina to exactly measure the local nerve activity with a high resolution. This allows at least to get a precise image of the patterns seen by the nerves of the retina at this moment. Maybe even a coloured picture similar to that seen with the eyes at this moment can be generated. A second system is simultaneously scanning the visual cortex.
During seeing a nerve signal from a spot on the retina is passed through the nerve system to the corresponding spot in the visual cortex. This spot then shows a nerve activity corresponding to the activity on the retina. Patterns seen by the eye show up on the surface of the brain as well.
Due to the irregular structure of the brain these patterns certainly will appear spatially distorted, but always in the same way. The technique described allows to map the retina and the visual cortex within seconds to gain sufficient data concerning the spatial distortion. This data then can be used to match a picture or a film to the spacial distortion in the visual cortex. This corrected picture will then be “seen” undistorted if written onto the brain with laser techniques.
Once this calibration is done any picture or film can be written at great distance onto the visual cortex. Certainly the picture seen by the eyes can be reproduced at great distances as well, using radar and lidar techniques to measure the direction the eyes are looking into. The picture of the area the eyes are looking into can be obtained by radar and lidar as well. This allows the possibility to write a modified or morphing picture or film of the reality into the visual cortex of the brain. This modified picture then interferes with the picture seen through the eyes. This technique seems to be used to simulate hallucinations by introduction of additional pictures or colours. The quality of the pictures and films being transmitted with this technique is unknown but may be very high. Certainly this technique used by the CIA/ NSA/ FBI is very costly and an enormous waste of tax money.
Making visible the picture seen by the eyes through tapping of the nerves seems to be done under favorable conditions for other reasons as well. In this case the tapped nerve signals are used to generate an exact picture of what is seen with the retina, to reveal what a person is looking at. And high resolution laser weapons allow to exactly steer the muscles of the eyes of a victim.
Both techniques combined allow the exact picture seen by a victim to be written on the retina of a CIA/ NSA/ FBI official. Then the movements of the muscles in the eye of the CIA/ NSA/ FBI official can be measured with radar and the data be used to steer the muscles of the victim likewise. This allows the agency preceding the CIA/ NSA/ FBI to cause a victim to see what they want him to see and to prevent the victim from seeing something else. This technique is being used in many ways to force a victim to make decisions, like choosing a certain company from the yellow pages or looking at specific points of a map omitting others.
Obviously crude techniques using electromagnetic radiation to write a picture onto the brain are known for quite some time. Around 1975 when I was about 10 years of age I had been told by classmates that one would have a third eye, situated on the brain right in the middle of the forehead, which I, of course, did not believe. However these children at the age of 10 or 12 years certainly knew a little more despite giving a false location for the visual cortex.
State of the art
According to the techniques published, one would expect a high resolution laser beam being split into two. One of these laser beams would run through a pockels cell where a synthesizer generated microwave signal would be added. This microwave signal would be asymmetric. Additionally it would be a spread spectrum signal, meaning that its frequency would change very fast over several Ghz. The interaction of these two laser beams produces beats in the microwave range.
As a result we have a high resolution and highly directional beam of an asymmetric electromagnetic field in the microwave range which then produces a low frequency current which can imitate the natural currents of the nerves. The target area is then scanned with this high resolution beam. Such beats in the microwave range penetrate an obstacle just like any radio frequency signal of the same frequency.
With this technique it is quite difficult to directly measure the beam due to the spread spectrum signal. Even with the proper measuring equipment it should be possible to shoot right around the sensors due to the very high resolution achievable with a laser. Other possibilities are jamming the sensors or using additional laser radiation which causes destructive interference of the electromagnetic waves within the sensor, nulling theeffect of the laser signal on this sensor.
Promising could be direct measurement of the currents on the surface, or better by electrodes within the body and comparing them with the natural body currents. Another possibility could be to use additional radiation of one or several suitable wavelengths which then interact with the radiation of the laser weapon to produce either beats or harmonics in a spectrum visible to the eye or cameras. A little bit of smoke would then reveal the path and origin of such a radiation used as weapon.
The generation of beats or harmonics can be used in shielding techniques as well. If additional radiation of a suitable wave length is overlaying or heterodyning the relatively low frequency beats of a laser weapon, harmonics can be generated in a frequency range which can not penetrate a certain barrier. An electromagnetic field causes atoms and molecules to move in time with the field. If the frequency of the electromagnetic field is low this movement of the atoms is slow as well, consuming relatively little of the energy being transmitted by the electromagnetic field. This allows microwave signals as well as electromagnetic beats in the microwave range to
If high frequency, for example infrared radiation, is overlaying the low frequency microwave signal, this heterodyning causes harmonics in the infrared region. These high frequency electromagnetic harmonics, like infrared radiation, are moving the atoms and molecules in time with their high frequency. These fast movements of atoms and molecules enforced by the harmonics or electromagnetic radiation are consuming the energy very fast, resulting in the radiation being shielded by converting it into heat.
The same physical principles are used for surveillance as well. The resolution achievable with laser radar techniques using infrared and visible light can be evaluated with regard to data storage on CD-ROM and DVD. Using heterodyning it is possible to penetrate one or several barriers. The use of UV-lasers allows a much higher resolution, making it possible to read CD-ROMs and DVDs at quite some distance, especially if they are positioned in a way exposing the optical layer to the laser. Stacks of many DVDґs may be read without any problem.
This makes possible to let organizations being interested in certain information, say voice or film recordings showing victims being tortured, to have a look at it and still being able to plausibly deny any knowledge. However, the material is archived somewhere. And the CIA/NSA/FBI certainly does not want this. And consequently may back off from torturing a person. Otherwise…film it, burn it and expose it.
The application to steering, brainwashing techniques and torture.
During steering the contraction of the muscles of the torturer is being measured with radar techniques. The contraction of the muscles of the torture victim is measured with radar techniques as well. Then electrical pulses are transmitted by laser or microwave techniques into the muscles of the torture victim till the muscles of both persons are contracted likewise, resulting in synchronous movements including speech. Being steered results in exactly following the movements of the person steering and saying what this person says.
Beating as it is frequently shown in the films requires purposeful movements of the body. These movements can be steered as described by a CIA/ NSA/ FBI official or by a person’s own brain. Brainwashing of course does not steer the muscles. Accordingly target is not beating during brainwashing and mood management as this requires deliberate and purposeful aimed movements of the body, not only enforced “thoughts” of any kind.
Brainwashing is done by converting voice into suitable electrical pulses. With theses pulses laser or microwave radiation is modulated in one of the already described ways. This modulated radiation is aimed at the regions of the head transmitting speech from the ears to the brain. This radiation then produces an electric current which is equivalent to the voice used for modulation.
Depending on the part of the head or brain being targeted this voice is perceived in a different way. If the ear is targeted the voice is heard like a normal voice as is the case with cochlear implants in deaf persons. If the areas of the brain are targeted which are transmitting the nerve signals from the ear to the brain, the voice does not come from the ear and is accordingly perceived more or less as thought. This makes it difficult, especially for the unaware, to distinguish between own thoughts and simulated “thoughts” enforced through brainwashing.
Because thoughts are more likely to be accepted as truth than an information given by another person, such enforced “thoughts” are used by the agency like the CIA/ NSA/ FBI to lie more effectively. An effective countermeasure could be to use an exotic language or dialect while thinking. This makes brainwashing more difficult as the CIA/ NSA/ FBI then has to use this language or dialect for brainwashing as well. The more exotic the better. America targeting native speakers of an exotic language for immigration may point to a possible operating field of the CIA/ NSA/ FBI, searching personnel to enable brainwashing in this region.
Additionally, enforced “thoughts” of any kind effectively prohibit a person to think on her own as long as the brainwashing continues. Such a prohibition to think, may result in a reduction of the intellectual capacity if continued over years due to lack of training. And it effectively prevents the targeted person to gain information from independent sources such as the media as a database to make correct decisions or to correct possible false beliefs.
This incident exposes the quality achievable in steering of the voice. Emotional changes in the torturers voice are being perfectly imitated by exactly copying the movements of the muscles to make the steered voice sound as natural as possible.
Obviously the computer processing the data being used for steering of the victims voice recognizes the emotionality of the steering CIA/ NSA/ FBI official to a certain extend. Techniques like stress analysis of the voice and measurement of the electrical resistance of the skin are being used in the polygraph for lie detection. The lower the resistance of the skin the stronger the current induced by radar and the stronger the returning radar signal.
With this data it is possible to a certain extend to automatically steer additional rudimentary mood management in phase with the mood and voice of the steering CIA/ NSA/ FBI official. Additional mood management used against the victim while being steered makes it harder to recognize this steering. Experiencing the own body insulting or even beating someone without being angry would be quite a strange experience, making it obvious that the own body is being steered. As it is sometimes been stated by persons being accused of aggressive behavior. The shouting and insulting carried out by the CIA/ NSA/ FBI official steering the target before beginning to beat could be part of this mood management system as well. To make it more difficult for target to recognize the mood management and the steering by diverting him through additional agitation.
A certain amount of blackout in some regions of the brain seems to be used by the CIA/ NSA/ FBI as well to render more difficult the detection of being steered. This suppression of intellectual capacity and power of recollection can be achieved through slowing down of the brainwaves or by jamming of the communication between the nerve cells using additional electric pulses being transmitted through radio frequency or laser weapons. Such a blackout sometimes as well is reported by persons being involved in violent incidents.
Even the short term memory can be erased to a certain extend as it stores the information electrically before this information finally is being stored chemically through connections of the nerves which can only be erased by destruction of the cells. But such a destruction would be easily detectable using modern medical equipment.
Electrical erasure of the short term memory by purpose can be assumed if one goes a short distance, say into another room for a certain reason and on arrival can not remember this reason.
The experience of a word being on the tip of someoneґs tongue which then slips away without the possibility to get a grip on it, also seems to be caused through erasure of the short term memory.
Committing someone to suicide can be achieved by brainwashing as well. However, directly steering a person into death will be much easier and thus be preferred. The recorded films show target completely being steered. This techniques can be used to assassinate a person by steering, using any of the conceivable methods to commit suicide. While being steered target had been made to shoot himself into the hand with an
Causing someone to drive straight ahead into a tree or walk into a passing car can easily be done by producing low frequency beta waves in the brain, prohibiting all conscious action. Simple devices using this mechanism by employing laser or microwave radiation.